English
русский
日本語
عربى
EspañolThe cold-water spigot is connected to the bottom of the reservoir, and the hot-water spigot connects to the tube within the heating element, which pushes heated water over the coffee grounds. If the water gets too hot, it sprays back onto the coffee grounds. After a couple of minutes, the spigot will automatically shut off. This is a convenient way to get a hot cup of coffee, especially if you're not always at home.
In case your coffee machine is blocked with sediment, you can try unplugging it and cleaning the water lines. You can use a small wire to unclog the drain hole. You may also want to clean the water spigot by using warm water and detergent. This will remove any mineral deposits that may be present. After that, you can use a spigot cleaner to remove any other stains and prevent future clogging.
A coffee maker comes with a reservoir. This container holds water that is transferred to the coffee grounds. The reservoir may be small or large. Coffee machines with reservoirs often have a hot-water tube that runs from the bottom of the machine to a faucet. The tube is usually white and insulated. If your reservoir is small, you might not be able to get enough water to make the coffee you want. But a big reservoir will prevent the machine from overheating.
If you don't have a large reservoir, you can use a cleaning solution made from citric acid. This cleaner is much less acidic than white vinegar and doesn't need multiple rinse cycles. Make sure you mix your cleaning agent with distilled water to make it as effective as possible. The mixture should be concentrated enough to fill the Coffee pot. You can then pour the cleaning solution into the reservoir. Then, rinse the machine thoroughly.
